[ale] when attempting to use ftape, floppy is accessed ratherthan parallel port device, huh ?.........

James P. Kinney III jkinney at localnetsolutions.com
Sun Feb 9 11:34:13 EST 2003


Does lpd have a printer defined to use the lpt0 port? That would start
at boot up and claim the device so that the ftape device can't see the
tape drive attached.

On Sun, 2003-02-09 at 00:31, Courtney Thomas wrote:
> Under RH7.2 [2.4.17] when I.........
> 
> 	mt -f /dev/nqft0 status
> I get...............................
> 
> 	no such device
> 
> I have an external Ditto Max Pro which worked under RH6.1 [2.2.12-20]
> installed by cable to the only parallel port on this machine. 
> 
> I have compiled and installed ftape4.04a from source, as well as
> ftape-tools.
> 
> I load parport, paride, ftape, zftape and bpck modules before the mt
> command.
> 
> The parallel port is at 0x378 and irq 7.
> 
> Thank you for helping,
> 
> Courtney
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
-- 
James P. Kinney III          \Changing the mobile computing world/
CEO & Director of Engineering \          one Linux user         /
Local Net Solutions,LLC        \           at a time.          /
770-493-8244                    \.___________________________./
http://www.localnetsolutions.com

GPG ID: 829C6CA7 James P. Kinney III (M.S. Physics) <jkinney at localnetsolutions.com>
Fingerprint = 3C9E 6366 54FC A3FE BA4D 0659 6190 ADC3 829C 6CA7 

 This is a digitally signed message part




More information about the Ale mailing list