[ale] Trying to use minicom and get a console connection

Keith Hopkins hne at inetnow.net
Tue Nov 13 16:41:42 EST 2001


Gene Matthews wrote:

> Any minicom experts around?  I'm trying to use my linux (RH7.1) laptop
> and minicom to connect to a remote terminal server's console port.
> 
> I can do this successfuly on Windows using HyperTerminal, but I don't
> have it working on Linux yet.
> 
> I have
> 
> A -    Serial Device      : /dev/ttyS0  (I've tried ttyS1 also)
> B - Lockfile Location     : /var/lock
> C -   Callin Program      :
> D -  Callout Program      :
> E -    Bps/Par/Bits       : 9600 8N1
> F - Hardware Flow Control : No
> G - Software Flow Control : No
> 
> for the serial port setup.
> 
> 
> This matches what I was using for HyperTerminal (COM1, 9600 8N1 w/ no
> flow control) and I'm using the exact same cable.
> 
> 
> The cable is a cat 5 (plugs into the console port of the term server)
> and a RJ45 to 9pin converter on the other side for the pc serial port.
> 
> I'd appreciate any thoughts/suggestions.
> 
> Thanks,
> 
> Gene
> 

What user are you using (root/non-root)?  What are the premissions on your device files (/dev/ttyS#)?

Lost in Tokyo,
   Keith



---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.






More information about the Ale mailing list