[ale] OT: Where can I learn about microphones?

arxaaron arxaaron at gmail.com
Fri Feb 10 23:34:42 EST 2012


On 2012/02/10, at 21:03 , Richard Bronosky wrote:

> The echo loop should be a non issue because we don't amplify the local
> attendees back into the room. That's just the way Skype, GoToMeeting,
> WebEx, and Google Hangouts work. The signal from the mics are only
> sent to the remote attendees. The signal from the remote attendees is
> the only thing that comes out of the speakers.

Yes, out of the local speakers and back into the open local microphones
on your end which feeds back into the remote speaker on their end
which feeds back into the remote microphones and comes back to
the local speakers....

As I said, echo loops are _always_ an issue with conferencing.

> The software has a
> pretty easy time of removing the signal from the speakers (from the
> remote attendees, remember) from what the mics pic up so that the
> remote attendees don't hear themselves echo.

The software CAN be smart about turning down remote feed to the
speakers when local input is detected, but there are no guarantees.

> I agree that micing a
> room to amplify and play back into the room is very hard. Luckily that
> is NOT what I am doing. I just need high, accurate gain.

Understood.  I think Michael was the one considering it as more of
a "PA"  configuration.

> Oh, as a side note, I found about a dozen good quality mics at work
> after everyone left for the day.
> https://plus.google.com/u/0/103188493504862905835/posts/R5tzUzbXsfY
>
> I'm not done by any means, but I bet I can use those!

Maybe so, but I'm not seeing the actual microphone element
in your pics, just connectors.  Seems like there are several
"micro flex"  mic options for the connectors you are showing.

<https://encrypted.google.com/search?q=shure+microflex+specs&hl=en&tbm=shop&aq=f 
 >

Lavalier's are probably not what you want. The boundary
or boom mics might meet your needs.


peace
aaron



> On Fri, Feb 10, 2012 at 6:43 PM, arxaaron <arxaaron at gmail.com> wrote:
>> If I were assembling an audio conferencing system, I would
>> probably go with multiple desktop "PZM" type microphones
>> or something similar that would sit flat on a table top.  I may
>> have a line on where you could get a bunch of these on the
>> cheap:
>>
>>    Crown 170 PCC SWO
>>    <http://www.crownaudio.com/mic_web/pcc.htm>
>>    (this model line also has some special features for conferencing
>>     that you might find useful)**
>>
>> then feed them into an automated "loudest mic" mixer
>>
>>    <http://www.fullcompass.com/product/291689.html>
>>    <http://www.fullcompass.com/product/382292.html>
>>    <http://www.fullcompass.com/product/321659.html>
>>    (There are 4 and 5 mic versions of the Audio Technica
>>      ATMX as well).
>>
>> and then the mixer would feed into a decent A2D USB interface like:
>>
>>    <http://tascam.com/product/us-122mkii/>
>>
>> ** The PCC microphones are designed for conference
>> and classroom situations and have push to talk or remote
>> open / closed capabilities. If your people were aware
>> enough to remember to turn on their mic when speaking,
>> the (pricey) automated mixer might not be necessary.
>>
>> In any conference situation with open speakers (instead of
>> everyone wearing headphones), the hurdle is avoiding echo
>> loops between the remote and local end.  Ideally, the local
>> speaker is muted when a local mic is in use and all the local
>> mics are muted when the local speaker is in use.  In a perfect
>> world, your conference connection software would be smart
>> enough to suppress audio return loops.
>>
>> Hope that was some definitive help.
>>
>> peace
>> aaron
>>
>>
>> On 2012/02/10, at 14:51 , Richard Bronosky wrote:
>>
>>> I need to learn about microphones so that I can build some
>>> teleconferencing kits. We have about a dozen different USB mics and
>>> they all suck. Every meeting is full of complaints that the remote
>>> attendees can't hear. I want analog mics and a mixing board.  
>>> Probably
>>> a USB digitizer. (I _might_ consider a USB mixing board if it is  
>>> very
>>> _very_ excellent.)
>>>
>>> I want to consider many options:
>>> 1. single condensor mics
>>> 2. multiple condensor mics
>>> 3. stationary directional mics
>>> 4. human operated directional mics
>>> 5. robotic directional mic or mics - either voice tracking or IR  
>>> baton
>>> tracking (I may have to build that one)
>>> 6. several lavalier mics
>>> 7. any other voodoo
>>>
>>> --
>>> .!# RichardBronosky #!.
>>> _______________________________________________
>>> Ale mailing list
>>> Ale at ale.org
>>> http://mail.ale.org/mailman/listinfo/ale
>>> See JOBS, ANNOUNCE and SCHOOLS lists at
>>> http://mail.ale.org/mailman/listinfo
>>
>> _______________________________________________
>> Ale mailing list
>> Ale at ale.org
>> http://mail.ale.org/mailman/listinfo/ale
>> See JOBS, ANNOUNCE and SCHOOLS lists at
>> http://mail.ale.org/mailman/listinfo
>
>
>
> -- 
> .!# RichardBronosky #!.
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo



More information about the Ale mailing list