[ale] fiber channel mounts

Jim Kinney jim.kinney at gmail.com
Mon Dec 7 16:43:44 EST 2009


Scott & Jeff,

Thanks for the tool ideas. I've tinkered with GFS before. The servers are
RHEL 5 so that's a (relatively) easy route.

new issue is fiber cards are 4x PCIe in an 8x slot. bandwidth is 1/2 the
rated capacity of 4Gbps. Grr. chunking around TB is a chore.

On Mon, Dec 7, 2009 at 1:26 PM, Jeff Lightner <jlightner at water.com> wrote:

>  OCFS or OCFS2?
>
>
>
> Not arguing – just curious.
>
>
>  ------------------------------
>
> *From:* ale-bounces at ale.org [mailto:ale-bounces at ale.org] *On Behalf Of *
> scott
> *Sent:* Monday, December 07, 2009 1:08 PM
>
> *To:* Atlanta Linux Enthusiasts - Yes! We run Linux!
> *Cc:* Atlanta Linux Enthusiasts - Yes! We run Linux!
> *Subject:* Re: [ale] fiber channel mounts
>
>
>
> With my tests OCFS has less performance/functionalities than GFS when used
> without oracle.
>
> Sent from my mobile...
>
>
> On Dec 7, 2009, at 12:56, "Jeff Lightner" <jlightner at water.com> wrote:
>
>  I’m saying while OCFS2 was initially designed for Oracle there is nothing
> prohibiting one from using it for other purposes since it is Open Source
> (i.e. no cost).
>
>
>
> However, it probably makes more sense to investigate GFS first if you’re
> not already familiar with OCFS2.
>
>
>  ------------------------------
>
> *From:* ale-bounces at ale.org [mailto:ale-bounces at ale.org] *On Behalf Of *
> scott
> *Sent:* Monday, December 07, 2009 12:40 PM
> *To:* Atlanta Linux Enthusiasts - Yes! We run Linux!
> *Cc:* Atlanta Linux Enthusiasts - Yes! We run Linux!
> *Subject:* Re: [ale] fiber channel mounts
>
>
>
> OCFS2 works very well with oracle...  GFS is a general purpose clustered
> filesystem...
>
> Sent from my mobile...
>
>
> On Dec 7, 2009, at 12:30, "Jeff Lightner" < <jlightner at water.com>
> jlightner at water.com> wrote:
>
>  You could get OCFS2 (open source) from Oracle’s web site.  It’s designed
> to allow you to use the same storage in a clustered configuration.  We use
> its predecessor OCFS for one of our old Oracle RAC environments but RAC
> isn’t required as OCFS2 handles its own clustering setup.  Its also
> reportedly a much improved product over OCFS(1).   It uses Linux’ O_DIRECT
> stuff for the file sharing so the tools you use have to be O_DIRECT aware
> and I think most of the newer ones (tar, ls, cp, mv etc…) are.   When we did
> it back on RHEL3 (2.4 kernel) we had to load the utilities Oracle had made
> that were (also open source).
>
>
>
> Also GFS I believe is designed for similar usage and is native to most
> distros but I haven’t used it.
>
>
>  ------------------------------
>
> *From:* <ale-bounces at ale.org>ale-bounces at ale.org [mailto:
> ale-bounces at ale.org] *On Behalf Of *Jim Kinney
> *Sent:* Monday, December 07, 2009 11:33 AM
> *To:* Atlanta Linux Enthusiasts - Yes! We run Linux!
> *Subject:* [ale] fiber channel mounts
>
>
>
> I have a netapp joined by fiber channel to 2 linux head end servers. I'm
> using multipath fiber channel in an active/active mode for maximum data
> throughput.
>
> box 1 can write a file and read that file is there. Box 2 can't see the
> file exists.
> box 2 can write file and see it on the netapp but box one does not see it.
>
> run sync on both boxes and umount/mount the netapp storage space again.
> both box 1 & 2 see the file written from box 1 but the file written from
> box 2 is gone.
>
> this is bad. Clearly I have a misconfiguration somewhere! Box 2 shows
> errors related to ext3 journal corruption so ext3 is NOT a good choice.
>
> Box 2 is supposed to be a failover database and the netapp is the storage
> for the database files. I would prefer for the failover to be closer to a
> hot standby than a cold standby but it looks like I can't keep the netapp
> partition mounted on box 2 if box 1 is still live. I'm not running the
> database at all on box 2.
>
> --
> --
> James P. Kinney III
> Actively in pursuit of Life, Liberty and Happiness
>
>
>
> Proud partner. Susan G. Komen for the Cure.
>
>
>
> *Please consider our environment before printing this e-mail or
> attachments.*
>
> ----------------------------------
> CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential
> information and is for the sole use of the intended recipient(s). If you are
> not the intended recipient, any disclosure, copying, distribution, or use of
> the contents of this information is prohibited and may be unlawful. If you
> have received this electronic transmission in error, please reply
> immediately to the sender that you have received the message in error, and
> delete it. Thank you.
> ----------------------------------
>
>  _______________________________________________
> Ale mailing list
>  <Ale at ale.org>Ale at ale.org
>  <http://mail.ale.org/mailman/listinfo/ale>
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
>  <http://mail.ale.org/mailman/listinfo>
> http://mail.ale.org/mailman/listinfo
>
>   _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo
>
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo
>
>


-- 
-- 
James P. Kinney III
Actively in pursuit of Life, Liberty and Happiness
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.ale.org/pipermail/ale/attachments/20091207/afac1eea/attachment.html 


More information about the Ale mailing list