[ale] swap for tech support

Drag0n dragon at atlantacon.org
Tue Jul 3 13:20:56 EDT 2007


In RedHat setup, the trick is to set each drive partition up separately 
as raid devices, then a raid array after that.


Drag0n

Jeffrey B. Layton wrote:
> Are you trying to configure RAID-1 on the whole OS
> using the 60GB and the 6GB drives?
>
>   
>> I need some help.
>>
>> Trying to get RAID-1 array set up so I can install distro of choice
>> (and try several out before making final decision) on rebuilt box.
>>
>> After banging my head against a brick wall for two nights I have
>> given up.  It is obvious that I do not think along the same pathways
>> as the person who devised the Red Hat RAID install software and I
>> can not decipher the proper _order_ for the steps in the process -- and
>> Red Hat's own instructions don't help.
>>
>>
>> To swap for assistance:
>>
>> one ASUS A&N266-VM/AA mobo w/AMD cpu and fan; 512 mgb memory,
>> onboard Nvidia graphics, extra ethernet card; two ATA hard drives:
>> one 60 GB and one 6 GB??  Probably do just fine as a file server.
>>
>> *** NO CASE ***  (The new mobo is in it!)
>>
>> Board has three PCI slots, one AGP slot, but only two memory slots
>> and can not handle the newer SATA drive cables.
>>
>> Sean
>>
>>   
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Ale mailing list
>> Ale at ale.org
>> http://www.ale.org/mailman/listinfo/ale
>>     
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
>
>
>   




More information about the Ale mailing list