[ale] Cisco 2600 DHCP config question

[Lane Oden]

JK wrote:
> Jim Popovitch wrote:
> 
>> I've got a 2600 @ $DAYJOB.  It hangs off of a dev network and routes
>> to/from a testbed network.  On the testbed network there lives a DHCP
>> server for some IP phone handsets.  The problem is systems on the dev
>> network get DHCP addresses from the testbed DHCP server instead of
>> the corp DHCP server which is upstream from the dev network.  
>> Ideally there would be a one-line ISO command to tell the 2600 to
>> not route DHCP requests...


no ip dhcp smart-relay ?
no ip helper-address ?

Either of those take care of you?

Is there anything in a sh run that mentions dhcp relay ?





The information transmitted is the property of NCP Solutions and is intended only for the person or entity to which it is addressed and may contain confidential, 
proprietary and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon this information by 
persons or entities, other than the intended recipient, is prohibited. If you receive this in error, please contact the sender and delete the material from all computers.