[ale] anyone got an Earthlink dialup "chatscript" that works properly ?

[Courtney Thomas]

In the last few weeks my formerly satisfactorily functioning chatscript
to logon to my dialup Earthlink connection, has become almost useless.

I don't know if it's my hardware [or theirs] or somebody's software, but
they won't help since they claim they only support WINDUHS.

I include a now transmogrified chatscript as an attachment for your
perusal   :-)

I can also send recent log fragments, to individuals, if necessary.

Haaaaaaaaaaalp !

[Thanks]
Courtney
-------------- next part --------------
pmdemand:
 set phone 7704985009
# set phone 4042200911
# set phone 6782219703
# set phone 6782454201
# set phone 4049754298
# set phone 4049789704
 set login "TIMEOUT 90 ogin:--ogin:MYLOGIN at earthlink.net word:MYPASSWORD"
# set login "TIMEOUT 90 115200"
 set timeout 120
# set ifaddr 0 0
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
 delete all
 add 0 0 HISADDR
 set authname MYLOGIN at earthlink.net
 set authkey MYPASSWORD
default:
 set device /dev/cuaa1
 set log Phase Chat LCP IPCP CCP tun command
# ident user-ppp VERSION (built COMPILATIONDATE)

# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
# set device /dev/cuaa1
 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
         \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 80 CONNECT"
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 set timeout 180			# 3 minute idle timer (the default)
# set default HISADDR
## enable dns				# request DNS info (for resolv.conf)
 disable ipv6cp
	
papchap:
 #
 # edit the next three lines and replace the items in caps with
 # the values which have been assigned by your ISP.
 #



 set phone PHONE_NUM
# set phone  
 set authname USERNAME
# set authname MYLOGIN at earthlink.net
 set authkey PASSWORD
# set authkey 013141

# set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
# add default HISADDR			# Add a (sticky) default route