[ale] problems with an Intel dual gig-e nic

Jerry Yu jjj863 at gmail.com
Mon Sep 19 09:33:16 EDT 2005


the default probably is to do DHCP. If you don't have a DHCP server to serve 
such request, it will time-out and fail. 
it is using e1000 mdule? If so, 'ethtool eth0' may help to determine the 
status of the NIC. of course, 'dmesg' or /var/log/messages should have some 
hints too, if there's problem.

On 9/16/05, Tony Carter <tcarter at entrusion.com> wrote:
> 
> Run ifconfig, lspci and lsmod and post the results.
> 
> -Tony
> 
> -----Original Message-----
> From: ale-bounces at ale.org [mailto:ale-bounces at ale.org] On Behalf Of tom
> sawyer
> Sent: Friday, September 16, 2005 1:16 PM
> To: ale at ale.org
> Subject: [ale] problems with an Intel dual gig-e nic
> 
> Hello all,
> 
> I'm trying to get a Intel dual pro/1000 nic working.
> the chip set says W82546EB. However, in a SuSe 9.2 install it sees the nic
> but times out trying to get the interfaces on it. I've tried this in a
> RH7.x
> based install and it doesn't even see it. Any ideas?
> 
> Thanks, Tom
> 
> 
> 
> 
> ______________________________________________________
> Yahoo! for Good
> Donate to the Hurricane Katrina relief effort.
> http://store.yahoo.com/redcross-donate3/
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
>
-------------- next part --------------
An HTML attachment was scrubbed...




More information about the Ale mailing list