[ale] new monitor

Mike Murphy mike at tyderia.net
Thu Mar 3 09:56:05 EST 2005


I have a 2001fp hooked up to an ATI x300, but I know it also works with 
my gForce mx4000 pci card too, so I'm willing to bet it should work with 
your fx5200 as well. Here's that monitor section from my xorg.conf:

Section "Monitor"
         Identifier   "Monitor0"
         VendorName   "Monitor Vendor"
         ModelName    "Dell 2001FP (Digital)"
         DisplaySize  410        310
         HorizSync    31.0 - 80.0
         VertRefresh  56.0 - 76.0
         Option      "dpms"
EndSection

and here's the accompanying screen definition:

Section "Screen"
         Identifier "Screen0"
         Device     "Videocard0"
         Monitor    "Monitor0"
         DefaultDepth     16
         SubSection "Display"
                 Viewport   0 0
                 Depth     24
                 Modes    "1600x1200"
         EndSubSection
EndSection

In this case, anaconda (fedora) sensed it on its own, but it has worked 
just fine. I've also copied and pasted both stanzas into the x config on 
my dell D600.

Mike


Orri Rail wrote:
> I got a new 20" dell 2001fp monitor which I can't use
> in the default 1600x1200 at 60hz resolution.  The video
> card is nvidia fx5200.  It works perfectly with win
> xp.
> 
> If i put the following correct sync rate in the
> monitor section of xorg.conf :
> 
> Section "Monitor"
>   HorizSync    75
>   Identifier   "Monitor[0]"
>   ModelName    "1600X1200 at 60HZ"
>   Option       "DPMS"
>   VendorName   "--> LCD"
>   VertRefresh  60
> EndSection
> 
> then X won't start and comes with this error :
> 
> (EE) Screen(s) found, but none have a usable
> configuration.
> 
> "Fatal server error:
> no screens found "
> 
> Changing the the sync rate to "HorizSync 31-80"
> launches X, but only in 1024x768 resolution.
> 
> Here's my Device section in xorg.conf
> 
> Section "Device"
>   BoardName    "GeForce FX 5200"
>   Driver       "nvidia"
>   Identifier   "Device[0]"
>   Screen       0
>   VendorName   "NVidia"
> EndSection
> 
> The Xorg.0.log writes out :
> "(II) NVIDIA(0): Mode "1600x1200" is larger than BIOS
> programmed panel size of 1024 x 768.  Removing."
> 
> Any help is greatly appreciated, I've been fiddling
> with this for the last week.  (I've tried adding
> modelines, but nothing works).
> 
> I'm running Suse 9.2
> 
> thanks,
> Orri  
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale

-- 

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Mike Murphy
781 Inman Mews Drive Atlanta GA 30307
Landline: 404-653-1070
Mobile: 404-545-6234
Email: mike at tyderia.net
AIM: mmichael453
ICBM: 33:45:14.0584N  84:21:43.038W
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+



More information about the Ale mailing list