[ale] harddrive errors

James P. Kinney III jkinney at localnetsolutions.com
Sun Jun 5 21:42:27 EDT 2005


On Sun, 2005-06-05 at 20:20 -0400, John Wells wrote:
> Jim Philips said:
> > Seagate, like other hard drive manufacturers, offers diagnostic software
> that
> > you can download and use to find out exactly what is happening with your
> disk:
> >
> > http://www.seagate.com/support/seatools/
> >
> 
> Ok...ran the Seagate Diagnostic "full" test and the drive passed with no
> errors.  Is this a sufficient guarantee that the drive is good?  I don't
> want to miss out on being able to return it if it's not.  For further
> information, here's what S.M.A.R.T has to say about it:

GET RID OF THE DRIVE!!!!! See below

> 
> ----------------------------
> $ sudo smartctl -a /dev/hda
> smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> === START OF INFORMATION SECTION ===
> Device Model:     ST3120026A
> Serial Number:    5JT5H6NQ
> Firmware Version: 8.01
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   6
> ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
> Local Time is:    Sun Jun  5 20:10:19 2005 EDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> 
> General SMART Values:
> Offline data collection status:  (0x82) Offline data collection activity
>                                         was completed without error.
>                                         Auto Offline Data Collection:
> Enabled.
> Self-test execution status:      (   0) The previous self-test routine
> completed
>                                         without error or no self-test has
> ever
>                                         been run.
> Total time to complete Offline
> data collection:                 ( 430) seconds.
> Offline data collection
> capabilities:                    (0x5b) SMART execute Offline immediate.
>                                         Auto Offline data collection
> on/off support.
>                                         Suspend Offline collection upon new
>                                         command.
>                                         Offline surface scan supported.
>                                         Self-test supported.
>                                         No Conveyance Self-test supported.
>                                         Selective Self-test supported.
> SMART capabilities:            (0x0003) Saves SMART data before entering
>                                         power-saving mode.
>                                         Supports SMART auto save timer.
> Error logging capability:        (0x01) Error logging supported.
>                                         General Purpose Logging supported.
> Short self-test routine
> recommended polling time:        (   1) minutes.
> Extended self-test routine
> recommended polling time:        (  85) minutes.
> 
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED 
> WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x000f   068   062   006    Pre-fail  Always  
>     -       109071597


ERRORS!!!!!


>   3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always  
>     -       0
>   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always  
>     -       0
>   5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always  
>     -       0
>   7 Seek_Error_Rate         0x000f   066   060   030    Pre-fail  Always  
>     -       4123130


THESE ARE WHAT YOU'VE BEEN SEEING


>   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always  
>     -       543
>  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always  
>     -       0
>  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always  
>     -       21
> 194 Temperature_Celsius     0x0022   037   040   000    Old_age   Always  
>     -       37
> 195 Hardware_ECC_Recovered  0x001a   068   062   000    Old_age   Always  
>     -       109071597


The error correction is being used heavily to make up for the short
comings of the drive.

> 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always  
>     -       0
> 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline 
>     -       0
> 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always  
>     -       0
> 200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline 
>     -       0
> 202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always  
>     -       0
> 
> SMART Error Log Version: 1
> ATA Error Count: 1
>         CR = Command Register [HEX]
>         FR = Features Register [HEX]
>         SC = Sector Count Register [HEX]
>         SN = Sector Number Register [HEX]
>         CL = Cylinder Low Register [HEX]
>         CH = Cylinder High Register [HEX]
>         DH = Device/Head Register [HEX]
>         DC = Device Command Register [HEX]
>         ER = Error register [HEX]
>         ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
> 
> Error 1 occurred at disk power-on lifetime: 519 hours (21 days + 15 hours)
>   When the command that caused the error occurred, the device was active
> or idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 08 32 ec 12 e0  Error: UNC 8 sectors at LBA = 0x0012ec32 = 1240114
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   25 00 08 32 ec 12 e0 00      18:59:19.206  READ DMA EXT
>   35 00 08 fa 36 f9 e0 00      18:59:18.933  WRITE DMA EXT
>   35 00 08 fa 14 fe e0 00      18:59:18.912  WRITE DMA EXT
>   35 00 88 72 14 fe e0 00      18:59:18.909  WRITE DMA EXT
>   35 00 08 0a c8 bf e0 00      18:59:18.892  WRITE DMA EXT
> 
> SMART Self-test log structure revision number 1
> Num  Test_Description    Status                  Remaining 
> LifeTime(hours)  LBA_of_first_error
> # 1  Short offline       Completed without error       00%       540      
>   -
> 
> SMART Selective self-test log data structure revision number 1
>  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>     1        0        0  Not_testing
>     2        0        0  Not_testing
>     3        0        0  Not_testing
>     4        0        0  Not_testing
>     5        0        0  Not_testing
> Selective self-test flags (0x0):
>   After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
> 
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
-- 
James P. Kinney III          \Changing the mobile computing world/
CEO & Director of Engineering \          one Linux user         /
Local Net Solutions,LLC        \           at a time.          /
770-493-8244                    \.___________________________./
http://www.localnetsolutions.com

GPG ID: 829C6CA7 James P. Kinney III (M.S. Physics)
<jkinney at localnetsolutions.com>
Fingerprint = 3C9E 6366 54FC A3FE BA4D 0659 6190 ADC3 829C 6CA7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part




More information about the Ale mailing list