[ale] lm_sensors with i2c on Tyan MB with i810 chip

[Geoffrey]

Christopher Fowler wrote:
> I'm playing around with lm_sensors on a Tyan motherboard and have ran
> into an issue.  It will only display my FAN speed.

Did you run sensors-detect?  I've found a lot of good info in the 
sensors default config file regarding different mobo tweaks.

Could it be you're simply on a flaky system?

> 
> [root at flaky]# lmsensors 
> pc87366-isa-0860
> Adapter: ISA adapter
> in0:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> in1:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> in2:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> in3:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> in4:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> in5:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> in6:       +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> Vsb:       +6.03 V  (min =  +0.00 V, max =   6.03 V)       
> Vdd:       +6.03 V  (min =  +0.00 V, max =   6.03 V)       
> Vbat:      +0.00 V  (min =  +0.00 V, max =   0.00 V)       
> AVdd:      +6.03 V  (min =  +0.00 V, max =   6.03 V)       
> fan1:     6000 RPM  (min =  941 RPM, div = 2)          
> fan2:        0 RPM  (min =  952 RPM, div = 8)          OVERFLOW
> fan3:     11428 RPM  (min =  941 RPM, div = 2)          
> CPU0 Temp:    +0 C  (low  =    +0 C, high =    +0 C)  
> CPU0 Crit:    +0 C
> CPU1 Temp:    +0 C  (low  =    +0 C, high =    +0 C)  
> CPU1 Crit:    +0 C
> S-IO Temp:  -128 C  (low  =   -55 C, high =  +127 C)   ALARM
> S-IO Crit:  +127 C
> vid:      +0.000 V  (VRM Version 9.0)
> 
> 
> Has anyone got this to work with an i810 chip?
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
> 


-- 
Until later, Geoffrey