[ale] Unable to recieve faxes/mgetty+sendfax 1.1.30

[Jim Seymour]

Hi All,

	I am unable to receive faxes on my RH 7.3 box with 
mgetty+sendfax 1.1.3 and a Multitech MT5656ZDX-V modem.  The voice part is 
working great however faxes are recived as "all lines bad".  Some snips 
below from the vgetty.log.

snip

06/28 10:13:29 yS1   tio_set_flow_control( HARD XON_IN )
06/28 10:13:29 yS1   3757 Mb free on /var/spool/fax/incoming

snip

06/28 10:13:35 yS1   fax_wait_for: string 'CONNECT'** found **
06/28 10:13:35 yS1   sending DC2
06/28 10:13:35 yS1   3757 Mb free on /var/spool/fax/incoming
06/28 10:13:35 yS1   fax_get_page_data: wait for EOL, got: 
[0a][ff][ff][ff][ff][ff][ff][ff][ff][00]
06/28 10:13:35 yS1  fax_get_page_data: receiving 
/var/spool/fax/incoming/ffefda27aS1-770-457-9871.01...
06/28 10:13:46 yS1  fax_get_page_data: page end, bytes received: 21465
06/28 10:13:46 yS1  fax_wait_for(OK)
06/28 10:13:46 yS1    got:[0d][0a]+FPTS: 1,2234,2234,0[0d]
06/28 10:13:46 yS1   fax_wait_for: string '+FPTS: 1,2234,2234,0'
06/28 10:13:46 yS1  page status: +FPTS: 1,2234,2234,0
06/28 10:13:46 yS1   2234 lines received, 2234 lines bad, 0 bytes lost

snip

Googling has not produced anyone else with a similar problem.  I tried 
setting the port speed to 19200 to no avail.  Any ideas what would cause 
all lines to be bad?  I have also posted to the mgetty newsgroup however I 
have not had much luck getting a response in the past.

TIA for any and all help,

-- 
Jim Seymour
www.wingbarscafe.com


_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale