[ale] ssh -X won't work

matty91 at bellsouth.net matty91 at bellsouth.net
Sun Jun 15 11:17:48 EDT 2003 

Can you post your sshd_config as well?

- Ryan

On Sun, 15 Jun 2003, David Corbin wrote:

> OpenSSH_3.6.1p2 Debian 1:3.6.1p2-3, SSH protocols 1.5/2.0, OpenSSL 0x0090702f
> debug1: Reading configuration data /etc/ssh/ssh_config
> debug1: Rhosts Authentication disabled, originating port will not be trusted.
> debug2: ssh_connect: needpriv 0
> debug1: Connecting to flute [192.168.26.1] port 22.
> debug1: Connection established.
> debug1: identity file /home/dcorbin/.ssh/identity type 0
> debug1: identity file /home/dcorbin/.ssh/id_rsa type -1
> debug3: Not a RSA1 key file /home/dcorbin/.ssh/id_dsa.
> debug2: key_type_from_name: unknown key type '-----BEGIN'
> debug3: key_read: missing keytype
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug2: key_type_from_name: unknown key type '-----END'
> debug3: key_read: missing keytype
> debug1: identity file /home/dcorbin/.ssh/id_dsa type 2
> debug1: Remote protocol version 2.0, remote software version OpenSSH_3.4p1
> Debian 1:3.4p1-1
> debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-1 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.6.1p2 Debian 1:3.6.1p2-3
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: mac_init: found hmac-md5
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug2: mac_init: found hmac-md5
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug2: dh_gen_key: priv key bits set: 142/256
> debug2: bits set: 1657/3191
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> debug3: check_host_in_hostfile: filename /home/dcorbin/.ssh/known_hosts
> debug3: check_host_in_hostfile: match line 51
> debug3: check_host_in_hostfile: filename /home/dcorbin/.ssh/known_hosts
> debug3: check_host_in_hostfile: match line 51
> debug1: Host 'flute' is known and matches the RSA host key.
> debug1: Found key in /home/dcorbin/.ssh/known_hosts:51
> debug2: bits set: 1610/3191
> debug1: ssh_rsa_verify: signature correct
> debug2: kex_derive_keys
> debug2: set_newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: expecting SSH2_MSG_NEWKEYS
> debug2: set_newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: SSH2_MSG_SERVICE_REQUEST sent
> debug2: service_accept: ssh-userauth
> debug1: SSH2_MSG_SERVICE_ACCEPT received
> debug1: Authentications that can continue:
> publickey,password,keyboard-interactive
> debug3: start over, passed a different list
> publickey,password,keyboard-interactive
> debug3: preferred publickey,keyboard-interactive,password
> debug3: authmethod_lookup publickey
> debug3: remaining preferred: keyboard-interactive,password
> debug3: authmethod_is_enabled publickey
> debug1: Next authentication method: publickey
> debug2: userauth_pubkey_agent: no keys at all
> debug2: userauth_pubkey_agent: no more keys
> debug2: userauth_pubkey_agent: no message sent
> debug1: Trying private key: /home/dcorbin/.ssh/id_rsa
> debug3: no such identity: /home/dcorbin/.ssh/id_rsa
> debug1: Offering public key: /home/dcorbin/.ssh/id_dsa
> debug3: send_pubkey_test
> debug2: we sent a publickey packet, wait for reply
> debug1: Server accepts key: pkalg ssh-dss blen 433 lastkey 0x8083500 hint 2
> debug2: input_userauth_pk_ok: fp
> 9a:a9:d8:08:d3:9b:fd:98:3f:d6:e0:20:d6:ad:f7:f0
> debug3: sign_and_send_pubkey
> debug1: read PEM private key done: type DSA
> debug1: Authentication succeeded (publickey).
> debug1: fd 6 setting O_NONBLOCK
> debug1: channel 0: new [client-session]
> debug3: ssh_session2_open: channel_new: 0
> debug2: channel 0: send open
> debug1: Entering interactive session.
> debug2: callback start
> debug2: ssh_session2_setup: id 0
> debug1: channel 0: request pty-req
> debug3: tty_make_modes: ospeed 38400
> debug3: tty_make_modes: ispeed 38400
> debug3: tty_make_modes: 1 3
> debug3: tty_make_modes: 2 28
> debug3: tty_make_modes: 3 127
> debug3: tty_make_modes: 4 21
> debug3: tty_make_modes: 5 4
> debug3: tty_make_modes: 6 0
> debug3: tty_make_modes: 7 0
> debug3: tty_make_modes: 8 17
> debug3: tty_make_modes: 9 19
> debug3: tty_make_modes: 10 26
> debug3: tty_make_modes: 12 18
> debug3: tty_make_modes: 13 23
> debug3: tty_make_modes: 14 22
> debug3: tty_make_modes: 18 15
> debug3: tty_make_modes: 30 0
> debug3: tty_make_modes: 31 0
> debug3: tty_make_modes: 32 0
> debug3: tty_make_modes: 33 0
> debug3: tty_make_modes: 34 0
> debug3: tty_make_modes: 35 0
> debug3: tty_make_modes: 36 1
> debug3: tty_make_modes: 37 0
> debug3: tty_make_modes: 38 1
> debug3: tty_make_modes: 39 0
> debug3: tty_make_modes: 40 0
> debug3: tty_make_modes: 41 0
> debug3: tty_make_modes: 50 1
> debug3: tty_make_modes: 51 1
> debug3: tty_make_modes: 52 0
> debug3: tty_make_modes: 53 1
> debug3: tty_make_modes: 54 1
> debug3: tty_make_modes: 55 1
> debug3: tty_make_modes: 56 0
> debug3: tty_make_modes: 57 0
> debug3: tty_make_modes: 58 0
> debug3: tty_make_modes: 59 1
> debug3: tty_make_modes: 60 1
> debug3: tty_make_modes: 61 1
> debug3: tty_make_modes: 62 0
> debug3: tty_make_modes: 70 1
> debug3: tty_make_modes: 71 0
> debug3: tty_make_modes: 72 1
> debug3: tty_make_modes: 73 0
> debug3: tty_make_modes: 74 0
> debug3: tty_make_modes: 75 0
> debug3: tty_make_modes: 90 1
> debug3: tty_make_modes: 91 1
> debug3: tty_make_modes: 92 0
> debug3: tty_make_modes: 93 0
> debug2: x11_get_proto: /usr/bin/X11/xauth list unix:10.0 2>/dev/null
> debug1: Requesting X11 forwarding with authentication spoofing.
> debug1: channel 0: request x11-req
> debug1: channel 0: request shell
> debug2: fd 3 setting TCP_NODELAY
> debug2: callback done
> debug1: channel 0: open confirm rwindow 0 rmax 32768
> debug2: channel 0: rcvd adjust 131072
> debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
> debug1: channel 0: rcvd eof
> debug1: channel 0: output open -> drain
> debug1: channel 0: obuf empty
> debug1: channel 0: close_write
> debug1: channel 0: output drain -> closed
> debug1: channel 0: rcvd close
> debug1: channel 0: close_read
> debug1: channel 0: input open -> closed
> debug3: channel 0: will not send data after close
> debug1: channel 0: almost dead
> debug1: channel 0: gc: notify user
> debug1: channel 0: gc: user detached
> debug1: channel 0: send close
> debug1: channel 0: is dead
> debug1: channel 0: garbage collecting
> debug1: channel_free: channel 0: client-session, nchannels 1
> debug3: channel_free: status: The following connections are open:\015
>   #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1)\015
>
> debug3: channel_close_fds: channel 0: r -1 w -1 e 6
> debug1: fd 2 clearing O_NONBLOCK
>
>
>
> On Sunday 15 June 2003 10:55, matty91 at bellsouth.net wrote:
> > What does ssh -X -vvvv host spew out?
> >
> > - Ryan
> >
> > On Sun, 15 Jun 2003, David Corbin wrote:
> > > There appears to be.  After ssh, I type "xauth", and it loads an
> > > interactive program that appears to, in fact, be xauth.
> > >
> > > On Saturday 14 June 2003 22:38, matty91 at bellsouth.net wrote:
> > > > Is there a "xauth: binary installed? If not, you need to specify the
> > > > location with XAuthLocation.
> > > >
> > > > - Ryan
> > > >
> > > > On Sat, 14 Jun 2003, David Corbin wrote:
> > > > > I have one particular server, that I "ssh -X " to, and it won't set
> > > > > DISPLAY for me.  I've checked the sshd_config and it is does have
> > > > > X11Forwarding enabled.  When I run sshd with -d I get
> > > > >
> > > > > debug1: server_input_channel_req: channel 0 request x11-req reply 0
> > > > > debug1: session_by_channel: session 0 channel 0
> > > > > debug1: session_input_channel_req: session 0 req x11-req
> > > > >
> > > > > (not sure if this is relevant, but it's the part of the dump that
> > > > > refers to X11).
> > > > >
> > > > > Any ideas on what might be wrong?
> > > > >
> > > > > David
> > > > > _______________________________________________
> > > > > Ale mailing list
> > > > > Ale at ale.org
> > > > > http://www.ale.org/mailman/listinfo/ale
> > > >
> > > > Ryan Matteson - UNIX Administrator | GPG ID: 92D5DFFF
> > > > Public Key: http://www.daemons.net/~matty/public_key.txt
> > > > Fingerprint = 4BEC 6145 30A6 BCE6 5602 FF11 4954 165D 92D5 DFFF
> > > > _______________________________________________
> > > > Ale mailing list
> > > > Ale at ale.org
> > > > http://www.ale.org/mailman/listinfo/ale
> > >
> > > _______________________________________________
> > > Ale mailing list
> > > Ale at ale.org
> > > http://www.ale.org/mailman/listinfo/ale
> >
> > Ryan Matteson - UNIX Administrator | GPG ID: 92D5DFFF
> > Public Key: http://www.daemons.net/~matty/public_key.txt
> > Fingerprint = 4BEC 6145 30A6 BCE6 5602 FF11 4954 165D 92D5 DFFF
> > _______________________________________________
> > Ale mailing list
> > Ale at ale.org
> > http://www.ale.org/mailman/listinfo/ale
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
>

Ryan Matteson - UNIX Administrator | GPG ID: 92D5DFFF
Public Key: http://www.daemons.net/~matty/public_key.txt
Fingerprint = 4BEC 6145 30A6 BCE6 5602 FF11 4954 165D 92D5 DFFF
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale

More information about the Ale mailing list