[ale] Weird SCSI Drive Compatibility Issue

[Jeff Hubbs]

On Wed, 2003-01-15 at 18:19, Marvin Dickens wrote:

> On that drive, if you set the jumpers incorrectly, it shows up with
> strange geometry. If that's not the problem, try formating the drive.
> Other than that, early versions of the 2940uw had buggy code. You might
> want to check the firmware version and upgrade the code (If it's old).

Marvin -

There aren't that many jumpers to set and the ones that are set work
fine on two different narrow controllers.  I will look into the firmware
issue.

I did low-level format the drive via the 2940's BIOS with no joy.

- Jeff

_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale