[ale] ddclient

[Klepinger, Aaron]

any idea what i could be doing wrong with the ddclient.conf file below?  it
doesn't work.  it gives me the error that it can't find my IP address.
http://burry.ca:4141/ddclient/

also, i am using the following syntax to update my zoneedit dynamic dns
(using cron job) and it works fine:
lynx -source -auth=username:password
'http://dynamic.zoneedit.com/auth/dynamic.html?host=www.mydomain.com,domain.
com'

i'd like to use the client, though, so i don't have to use cron every 5
minutes.

aaron

-----Original Message-----
From: Aaron [mailto:aaronklep at yahoo.com]
To: ale at ale.org
Sent: Thursday, August 22, 2002 11:54 PM
To: Aaron Klepinger
Subject: ddclient


######################################################################
## 
## Define default global variables with lines like:
## 	var=value [, var=value]*
## These values will be used for each following host
unless overridden
## with a local variable definition.
##
## Define local variables for one or more hosts with:
## 	var=value [, var=value]*
host.and.domain[,host2.and.domain...]
##
## Lines can be continued on the following line by
ending the line
## with a \
##
######################################################################
daemon=120					# check every 300 seconds
syslog=yes					# log update msgs to syslog
mail=root					# mail update msgs to root
pid=/var/run/ddclient.pid			# record PID in file.
#
#use=watchguard-soho,        fw=192.168.111.1:80	# via
Watchguard's SOHO FW
#use=netopia-r910,           fw=192.168.111.1:80	# via
Netopia R910 FW
#use=smc-barricade,          fw=192.168.123.254:80	#
via SMC's Barricade FW
#use=netgear-rt3xx,          fw=192.168.0.1:80		# via
Netgear's internet FW
#use=linksys,                fw=192.168.1.1:80		# via
Linksys's internet FW
#use=maxgate-ugate3x00,      fw=192.168.0.1:80		# via
MaxGate's UGATE-3x00  FW
#use=elsa-lancom-dsl10,      fw=10.0.0.254:80		# via
ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80		# via
ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80		# via
ELSA LanCom DSL/10 DSL Router
#use=alcatel-stp,            fw=10.0.0.138:80         
 # via Alcatel Speed Touch Pro
#use=xsense-aero,            fw=192.168.1.1:80        
 # via Xsense Aero Router
#fw-login=admin,             fw-password=XXXXXX		# FW
login and password
#
## To obtain an IP address from FW status page (using
fw-login, fw-password)
#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP
Address' # found after IP Address
#
## To obtain an IP address from Web status page (using
the proxy if defined)
#use=web, web=checkip.dyndns.org/, web-skip='IP
Address' # found after IP Address
#
#use=ip,                     ip=127.0.0.1	# via static
IP's
#use=if,                     if=eth0		# via interfaces
#use=web					# via web
#
#protocol=dyndns2				# default protocol
#proxy=fasthttp.sympatico.ca:80			# default proxy
#server=members.dyndns.org			# default server
#server=members.dyndns.org:8245			# default server
(bypassing proxies)

#login=your-login				# default login
#password=test					# default password
#mx=mx.for.your.host				# default MX
#backupmx=yes|no				# host is primary MX?
#wildcard=yes|no				# add wildcard CNAME?

##
## dyndns.org dynamic addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# server=members.dyndns.org,		\
# protocol=dyndns2			\
# your-dynamic-host.dyndns.org

##
## dyndns.org static addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# static=yes				\
# server=members.dyndns.org,		\
# protocol=dyndns2			\
# your-static-host.dyndns.org

##
##
## dyndns.org custom addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# custom=yes				\
# server=members.dyndns.org,		\
# protocol=dyndns2			\
# your-domain.top-level,your-other-domain.top-level

##
## ZoneEdit (zoneedit.com)
##
server=www.zoneedit.com, 		\
protocol=zoneedit1,			\
login=<mylogingname>,  			\
password=<your password>		\
<www.domain.toplevel,domain.toplevel>

##
## EasyDNS (easydns.com)
##
# server=members.easydns.com, 		\
# protocol=easydns,			\
# login=your-easydns-login,  		\
# password=your-easydns-password	\
# your.any.domain,your-2nd.any.domain

##
## Hammernode (hn.org) dynamic addresses
##
# server=dup.hn.org,             	\
# protocol=hammernode1,         	\
# login=your-hn-login,           	\
# password=your-hn-password      	\








==================================================
This message contains PRIVILEGED and CONFIDENTIAL
information that is intended only for use by the named recipient.
If you are not the named recipient, any disclosure, dissemination,
or action based on the contents of this message is prohibited.
In such case please notify us and destroy and delete all copies
of this transmission.  Thank you.
==================================================

---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.