[ale] k7s5a motherboard

George Johnson gljay at earthlink.net
Mon Oct 21 08:57:14 EDT 2002


Did you purchase a good case?  Mine costs almost $100.  I figured that if I
was going high end on the cpu I would need to keep it cool.  It has worked
well so far.  I have a fan in front sucking in, one on the power supply and
one extra in the rear blowing out, one on the cpu and one on the mobo pci
bus chip.  I found going cheap on the case at this point did NOT work.  I
also like my room kept cool.

gj

-----Original Message-----
From: Geoffrey [mailto:esoteric at 3times25.net]
To: ale at ale.org
Sent: Monday, October 21, 2002 8:43 AM
To: ALE
Subject: [ale] k7s5a motherboard


I did get the k7s5a mb and it appears everything is supported.  I've got
sensors working, the intergrated nic and sound to some extent.  There's
actually a page on this particular board and linux someone put together.

Question though.  It appears my cpu is running hot.  Sensors say the max
is 45C and it's now at 44, it was at 46 yesterday and I shut the box
down.  I've got a heatsink/fan on the cpu as well as one fan in the
front of the box pulling air in and the ps fan pulling it out.  I added
another fan last night to pull air out the back, but I'm still running
on the edge of the limits.

The box did lock up the other day for no apparent reason.  I assume it
might be a heat issue.  Interestingly enough, it had been running for a
couple of days 24 hours with no problems, but the sides were not
assembled, which could have provided some heat relief.  I think I'll
pull the sides off again and see if the temp drops.

I do have one fan pulling air in and two pulling it out, so I guess I
could look at adding another to pull air in, although I'd have to either
modify the case or add one of those slot fans.

Suggestions would be appreciated.

--
Until later: Geoffrey		esoteric at 3times25.net

I didn't have to buy my radio from a specific company to listen
to FM, why doesn't that apply to the Internet (anymore...)?


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.




---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.






More information about the Ale mailing list