[ale] burned by the burner

Robert Heaven robertheaven at earthlink.net
Sun Nov 3 12:34:34 EST 2002


Had this same thing happen to me one day when I hooked up my external
zip drive to the parallel port. It took over the 0,0,0 device address
and the burner got bumped down to the 1,0,0 device.

On Sun, 2002-11-03 at 00:08, ChangingLINKS.com wrote:
> Wow! Thank you. That solved the problem. 
> The info returned was 1,0,0 which was a combo that I did not try.
> Thanks again!
> 
> Drew
> 
> On Saturday 02 November 2002 23:00, you wrote:
> > What do you get when you type: cdrecord --scanbus
> > 
> > 
> > 
> > On Sat, 2002-11-02 at 23:43, ChangingLINKS.com wrote:
> > > Can anyone tell me why my burner stopped working?
> > > I could swear that I have burned CDs in RedHat 8.0 with this install. Now 
> it 
> > > doesn't work. I tried tampering with the numbers some per the man file but 
> > > had no luck. I have burned many CDs with the following command:
> > > 
> > > [root at computer root]# cdrecord -v speed=4 dev=0,0,0 -data 
> > > /data/save/trash/cdimage.iso
> > > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling
> > > TOC Type: 1 = CD-ROM
> > > scsidev: '0,0,0'
> > > scsibus: 0 target: 0 lun: 0
> > > Linux sg driver version: 3.1.24
> > > Using libscg version 'schily-0.5'
> > > atapi: 1
> > > Device type    : Removable Disk
> > > Version        : 2
> > > Response Format: 2
> > > Capabilities   :
> > > Vendor_info    : 'General '
> > > Identifikation : 'Flash Disk Drive'
> > > Revision       : '2.05'
> > > Device seems to be: Generic CCS Disk.
> > > cdrecord: Sorry, no CD/DVD-Drive found on this target.
> > > [root at computer root]# cat /etc/fstab
> > > LABEL=/                 /                       ext3    defaults        1 
> 1
> > > LABEL=/boot             /boot                   ext3    defaults        1 
> 2
> > > LABEL=/data             /data                   ext3    defaults        1 
> 2
> > > none                    /dev/pts                devpts  gid=5,mode=620  0 
> 0
> > > none                    /proc                   proc    defaults        0 
> 0
> > > none                    /dev/shm                tmpfs   defaults        0 
> 0
> > > /dev/hda3               swap                    swap    defaults        0 
> 0
> > > /dev/cdrom              /mnt/cdrom              iso9660 
> noauto,owner,kudzu,ro 
> > > 0 0
> > > /dev/fd0                /mnt/floppy             auto    noauto,owner,kudzu 
> 0 0
> > > /dev/cdrom1             /mnt/cdrom1             iso9660 
> noauto,owner,kudzu,ro 
> > > 0 0
> > > [root at computer root]#
> > > 
> > > -- 
> > > Wishing you Happiness, Joy and Laughter,
> > > Drew
> > > http://www.ChangingLINKS.com
> > > 
> > > ---
> > > This message has been sent through the ALE general discussion list.
> > > See http://www.ale.org/mailing-lists.shtml for more info. Problems should 
> be 
> > > sent to listmaster at ale dot org.
> > > 
> > 
> > 
> > 
> 
> -- 
> Wishing you Happiness, Joy and Laughter,
> Drew
> http://www.ChangingLINKS.com



---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.






More information about the Ale mailing list