[ale] Lite-On 1640

Geoffrey esoteric at 3times25.net
Mon Jun 17 12:05:46 EDT 2002


I don't believe he'd get the output he's getting from cdrecord with the 
wrong device number.

I also believe that dev= requires a scsi device, whether that's real 
scsi or ide emulation.  My cdr works fine and it's 0,0,0 and scsi-ide 
emulation.

Dow Hurst wrote:
> dev=0,0,0 seems too much like the scsi controller.  Isn't more like 
> dev=0,1,0 or some such beast?  Is the ide-scsi emulation setup right?
> Dow
> 
> cfowler wrote:
> 
>> Is there a secret to getting the LITE-ON 1640 CD-RW to work under
>> RH7.3?  Here is what I get:
>>
>>
>>
>> [root at cfowler tmp]# cdrecord -v -speed=2 -dev=0,0,0 -data ./l.iso
>> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
>> TOC Type: 1 = CD-ROM
>> scsidev: '0,0,0'
>> scsibus: 0 target: 0 lun: 0
>> Linux sg driver version: 3.1.22
>> Using libscg version 'schily-0.5'
>> atapi: 1
>> Device type    : Removable CD-ROM
>> Version        : 0
>> Response Format: 1
>> Vendor_info    : 'LITE-ON '
>> Identifikation : 'LTR-16102B      '
>> Revision       : 'OS06'
>> Device seems to be: Generic mmc CD-RW.
>> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>> Driver flags   : SWABAUDIO
>> Drive buf size : 1966272 = 1920 KB
>> FIFO size      : 4194304 = 4096 KB
>> Track 01: data    0 MB         padsize: 280 KB
>> Total size:       0 MB (00:04.02) = 302 sectors
>> Lout start:       1 MB (00:06/02) = 302 sectors
>> Current Secsize: 2048
>> ATIP info from disk:
>>  Indicated writing power: 4
>>  Is not unrestricted
>>  Is not erasable
>>  Disk sub type: Medium Type A, high Beta category (A+) (3)
>>  ATIP start of lead in:  -11849 (97:24/01)
>>  ATIP start of lead out: 359848 (79:59/73)
>> Disk type:    Long strategy type (Cyanine, AZO or similar)
>> Manuf. index: 25
>> Manufacturer: Taiyo Yuden Company Limited
>> Blocks total: 359848 Blocks current: 359848 Blocks remaining: 359546
>> Starting to write CD/DVD at speed 2 in write mode for single session.
>> Last chance to quit, starting real write in 0 seconds. Operation starts.
>> Waiting for reader process to fill input buffer ... input buffer ready.
>> Performing OPC...
>> Starting new track at sector: 0
>> Track 01:   0 of   0 MB written.
>> Track 01: writing 280 KB of pad data.
>> Track 01: Total bytes read/written: 327680/614400 (300 sectors).
>> Writing  time:   27.970s
>> Fixating...
>>
>> cdrecord: Input/output error. close track/session: scsi sendcmd: no
>> error
>> CDB:  5B 00 02 00 00 00 00 00 00 00
>> status: 0x2 (CHECK CONDITION)
>> Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 72 00 00 00
>> Sense Key: 0x3 Medium Error, Segment 0
>> Sense Code: 0x72 Qual 0x00 (session fixation error) Fru 0x0
>> Sense flags: Blk 0 (not valid)
>> cmd finished after 113.069s timeout 480s
>> cmd finished after 113.069s timeout 480s
>> Fixating time:  113.095s
>> cdrecord: fifo had 6 puts and 6 gets.
>> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>> [root at cfowler tmp]#
>>
>>
>> Do I need to run Windows to burn on this thing?
>>
>>
>>
>>
>> ---
>> This message has been sent through the ALE general discussion list.
>> See http://www.ale.org/mailing-lists.shtml for more info. Problems 
>> should be sent to listmaster at ale dot org.
>>
>>
>>  
>>
> 
> 
> ---
> This message has been sent through the ALE general discussion list.
> See http://www.ale.org/mailing-lists.shtml for more info. Problems 
> should be sent to listmaster at ale dot org.
> 
> 


-- 
Until later: Geoffrey		esoteric at 3times25.net

I didn't have to buy my radio from a specific company to listen
to FM, why doesn't that apply to the Internet (anymore...)?


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.






More information about the Ale mailing list