[ale] HELP!!! /HDA DISASTER!

[Adrin]

I read somewhere once.  That the head to platen relationship.  Would be like
flying a 747  100 feet off the ground.
Maybe is was closer.  Would be a cool ride while it last though.

Adrin


-----Original Message-----
From: John Mills [mailto:jmmills at telocity.com]
To: ale at ale.org
Sent: Tuesday, January 29, 2002 2:17 PM
To: jeff hubbs
Cc: Ale (E-mail)
Subject: Re: [ale] HELP!!! /HDA DISASTER!

On Tue, 29 Jan 2002, jeff hubbs wrote:

> Maybe things have changed, but it has been my understanding that disk
> drives are at a normal 1 atm, open to the outside through a dense filter.

My understanding, too. They must be vented because the gas [air] expands
and contracts with temperature changes. Another point we're neglecting is
that disk heads are suspended hydrodynamically on a film of air dragged
along by the disk's spinning. No gas, no bearing under the heads: OUCH!

> John Mills wrote:
>
> > ... my guess is they start with
> > dry, clean air and vent the drives through filter material which stops
the
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > largest dirt, at least for consumer products.

Regards -
 John Mills


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.