[ale] Why only 128MB RAM?
hbbs at attbi.com
Mon Feb 18 12:41:44 EST 2002
What I found out from the RAM mfr is that my mobo takes "four-clock" RAM
whereas the DIMM is the newer "two-clock" type. He says I should try
older modules until I find one that works. I guess I could pursue this
at MicroSeconds or something.
George Johnson wrote:
>Is this ram high density? Check to see if your mobo takes 16 X or 4 X.
>None of mine take the 4 X and I tried. When I did it came back with half
>the size the dimm was. I use 16 X 8 and up.
>From: Jeff Hubbs [mailto:hbbs at attbi.com]
>Sent: Sunday, February 17, 2002 5:44 PM
>To: ale at ale.org
>Subject: [ale] Why only 128MB RAM?
> I have an Azza Socket 7 mobo and a 512MB PC133 DIMM I got from
>OfficeMax. For some reason the POST only shows 128MB. The manual for
>the mobo indicates that it ought to be able to take 3x512MB = 1.5GB RAM.
> Anyone know why it might say 128MB (aside from the possibility that it
>really IS 128MB?
>This message has been sent through the ALE general discussion list.
>See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
>sent to listmaster at ale dot org.
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.
More information about the Ale