[ale] Capture "devices" ?

cfowler cfowler at outpostsentinel.com
Tue Dec 3 09:03:19 EST 2002


I think there are some capture devices that are Firewire based. that you
can hook RCA into.  

I purchased a PCI card once and felt that it was useless due to the
crappy nature of the captures.  I had to capture small to get high frame
rates.  Then it look really bad on TV when I converted to VCD.

This device you are looking at, I believe is the USB Dazzle at $69.  I
would look on ebay first and get a used one.

On Tue, 2002-12-03 at 08:58, Robert L. Harris wrote:
> 
> 
>   Doesn't a firewire capture device require a firewire camera, etc?
> I've got a cam corder and web cam, both have RCA and Svideo outputs.  I
> don't have the budget right now to go buy a camera also, just a card and
> preferably a semi-cheap one ($100-$150 range).
> 
> 
> Thus spake cfowler (cfowler at outpostsentinel.com):
> 
> > Subject: Re: [ale] Capture "devices" ?
> > From: cfowler <cfowler at outpostsentinel.com>
> > To: ale at ale.org
> > X-Mailer: Ximian Evolution 1.0.3 (1.0.3-6) 
> > Date: 03 Dec 2002 08:49:05 -0500
> > 
> > Stop for a moment.
> > 
> > 
> > Hopefully some people here have experience with this.  I'm in the
> > process of using Firewire DV to do my capture.  I just ordered a cable
> > to go from my DV Camera to PC and am not looking for software that runs
> > in XP that does a *good* job of capture.
> > 
> > That usb device is a 1.0 device.  It will only do 30fps at a low
> > resolution.  At higher resolutions you'll get far fewer FPS.  USB 1.0
> > just does not have the bandwidht the keep up with the amount of data
> > that comes from the VCR, TV, Camera, etc.
> > 
> > I want 720x480 @ 30fps resolution.  I will not settil for anything less
> > and USB does not offer it.  Firewire is the way to go.  USB 2.0 may do
> > it.
> > The worst device would be USB then PCI Card, and finally IEEE 1394 DV. 
> > So get the IEEE if possible.  If not look at a PCI card.  Stay away from
> > the UWB device.  Maybe others have input but this it what I found.
> > 
> > I'm torn between Dazzle and Pinnacle software to do my capturing.  I'm
> > not looking for fancy stuff I just want good quality captures to go to
> > VCD and DCD.
> > 
> > Chris
> > 
> > 
> > On Tue, 2002-12-03 at 08:34, Robert L. Harris wrote:
> > > 
> > > 
> > >   I'm looking to pickup a capture card/device on the way home today.
> > > While scouting CompUSA for parts the other day I found a cute little USB
> > > booger that looked like just wires going to a usb port, no "card" which
> > > would work very well for me as my USB ports are on the front and
> > > plugging in different cams, webcams, etc will be a real pain on my
> > > system right now.
> > > 
> > >   It lists Win98 compatable but I'm running 2k/Debian Unstable on my
> > > desktop.  Has anyone seen this thing?
> > > (http://www.startech.com/ststore/searchframe.asp?product_desc=capture&Description=Search+Results&Topbar=true)
> > > 
> > >   Any other suggestions that are relatively cheap?  I'd like to convert
> > > home movies of the kidlets to mpeg that I can send to the grandparrents
> > > as well as run a web cam off it.
> > > 
> > > Robert
> > > 
> > > 
> > > 
> > > 
> > > 
> > > :wq!
> > > ---------------------------------------------------------------------------
> > > Robert L. Harris                     | PGP Key ID: FC96D405
> > >                                
> > > DISCLAIMER:
> > >       These are MY OPINIONS ALONE.  I speak for no-one else.
> > > FYI:
> > >  perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
> > > 
> > > _______________________________________________
> > > Ale mailing list
> > > Ale at ale.org
> > > http://www.ale.org/mailman/listinfo/ale
> > > 
> > > 
> > 
> > 
> > _______________________________________________
> > Ale mailing list
> > Ale at ale.org
> > http://www.ale.org/mailman/listinfo/ale
> 
> 
> 
> :wq!
> ---------------------------------------------------------------------------
> Robert L. Harris                     | PGP Key ID: FC96D405
>                                
> DISCLAIMER:
>       These are MY OPINIONS ALONE.  I speak for no-one else.
> FYI:
>  perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
> 
> 


_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale






More information about the Ale mailing list