[ale] Problem with AHA-1522A and RH 5.1

Sat Jan 30 17:39:11 EST 1999

This is a multi-part message in MIME format.

------=_NextPart_000_0106_01BE4C5E.4D071860
Content-Type: multipart/alternative;
	boundary="----=_NextPart_001_0107_01BE4C5E.4D071860"

------=_NextPart_001_0107_01BE4C5E.4D071860
Content-Type: text/plain;
	charset="windows-1257"
Content-Transfer-Encoding: quoted-printable

I currently have system running Debian that I was hoping to switch over =
to RedHat 5.1.  I have added a CDROM which gets read fine and a 540MB =
drive, which also seems OK.  I had an AHA-1522A with a 1GB Micropolis =
that was working fine under Debian.  During the install, the ATAPI drive =
is seen and I can get the CDROM to be seen.  However, when it asks for =
SCSI adapters and I tell it the 152x it says it cannot be seen.

     A - Does someone have the jumper settings for the adapter?  =
(Adaptec does not have them on its site)
     B - Does anyone have experience getting one to work under RH?

Any help would be great!  Thanks!!!

Cary

------=_NextPart_001_0107_01BE4C5E.4D071860
Content-Type: text/html;
	charset="windows-1257"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
</pre>
<HTML>
<HEAD>

<META content=3D"text/html; charset=3Dwindows-1257" =
http-equiv=3DContent-Type><BASE=20
href=3Dfile://C:\PROGRA~1\COMMON~1\MICROS~1\Stationery\>
<STYLE>
<!--
body, PRE, BLOCKQUOTE, a, MENU, dd, UL, DT, dir, ADDRESS, h1, h2, h3, =
h4, h5, h6, HR
{
font-family: "Arial";
font-size: 12pt;
color: 000000;
}
-->
</STYLE>

<META content=3D'"MSHTML 4.72.3612.1700"' name=3DGENERATOR>
</HEAD>
<BODY background=3Dcid:00fe01be4ca1$5a3f5c20$0301010a at deepthroat =
bgColor=3D#ffffff>
<DIV>I currently have system running Debian that I was hoping to switch =
over to=20
RedHat 5.1.  I have added a CDROM which gets read fine and a 540MB =
drive,=20
which also seems OK.  I had an AHA-1522A with a 1GB Micropolis that =
was=20
working fine under Debian.  During the install, the ATAPI drive is =
seen and=20
I can get the CDROM to be seen.  However, when it asks for SCSI =
adapters=20
and I tell it the 152x it says it cannot be seen.</DIV>
<DIV> </DIV>
<DIV>     A - Does someone have the jumper settings =
for the=20
adapter?  (Adaptec does not have them on its site)</DIV>
<DIV>     B - Does anyone have experience getting =
one to=20
work under RH?</DIV>
<DIV> </DIV>
<DIV>Any help would be great!  Thanks!!!</DIV>
<DIV> </DIV>
<DIV>Cary</DIV></BODY></HTML>

------=_NextPart_001_0107_01BE4C5E.4D071860--

------=_NextPart_000_0106_01BE4C5E.4D071860
Content-Type: image/gif
Content-Transfer-Encoding: base64
Content-ID: <00fe01be4ca1$5a3f5c20$0301010a at deepthroat>
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------=_NextPart_000_0106_01BE4C5E.4D071860--