[ale] AT&T connect via PPP

Glynn Black blackgr at sysconn.com
Thu Sep 26 20:12:12 EDT 1996


I'm making a move from a local ISP here in Savannah to AT&T. Judging
from the PPP readme and the following information from bootup and
/proc/net/dev I believe I have my kernel configured right. 

from bootup: 
PPP: version 0.2.7 (4 channels) NEW_TTY_DRIVERS OPTIMIZE_FLAGS
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.

from /proc/net/dev:
Inter-|   Receive                  |  Transmit
 face |packets errs drop fifo frame|packets errs drop fifo colls carrier
    lo:      0    0    0    0    0       50    0    0    0     0    0
 dummy: No statistics available.
  ppp0:      0    0    0    0    0        0    0    0    0     0    0
  ppp1:      0    0    0    0    0        0    0    0    0     0    0
  ppp2:      0    0    0    0    0        0    0    0    0     0    0
  ppp3:      0    0    0    0    0        0    0    0    0     0    0
   sl0:   3974    0    0    0    0     4550    0    0    0     0    0
   sl1:      0    0    0    0    0        0    0    0    0     0    0
   sl2:      0    0    0    0    0        0    0    0    0     0    0
   sl3:      0    0    0    0    0        0    0    0    0     0    0
  eth0:      0    0    0    0    0        0    0    0    0     0    0

I pulled information off http://www.toppig.com/wurd/linux.html and
adopted the login script to my circumstances. For reasons unknown to
me, I can't seem to get my modem to dial out. My modem works, I can
dial out with minicom and manually dip/slip via my local isp, but I
keep getting "/dev/cua3 permission denied" when I attempt PPP.

toppig script:
#!/bin/sh
/usr/sbin/pppd name "blackgr at worldnet.att.net" -d connect \
        '/usr/sbin/chat -t 45 -v ABORT BUSY "" ATDT6516000 CONNECT ""' 
        /dev/cua3 57600 noipdefault modem defaultroute crtscts

from ppplog:
Sep 25 22:44:31 sx pppd[159]: pppd 2.1.2 started by root, uid 0 
Sep 25 22:44:31 sx pppd[159]: Connecting with </usr/sbin/chat -t 45 -v
ABORT BUSY "" ATDT6516000 CONNECT "">
Sep 25 22:44:31 sx chat[160]: abort on (BUSY) 
Sep 25 22:44:31 sx chat[160]: send (ATDT6516000^M) 
Sep 25 22:44:32 sx chat[160]: expect (CONNECT) 
Sep 25 22:45:17 sx pppd[159]: Exit.
Sep 25 22:45:17 sx chat[160]: alarm
Sep 25 22:45:17 sx chat[160]: Failed

I used some chat parameters from the PPP Howto to try and reset my
modem (along with various different combinations), but same deal.

script:
#!/bin/sh
/usr/sbin/pppd name "blackgr at worldnet.att.net" -d connect \
        '/usr/sbin/chat TIMEOUT 3 "" \rAT 0k-+++\c-OK AT&D2&C1 TIMEOUT
60 OK ATDT6516000 CONNECT ""' 
        /dev/cua3 57600 noipdefault modem defaultroute crtscts

STDOUT:
sh: D2: command not found
sh: C1: command not found
sh: 60: command not found
/usr/local/bin/worldnet: /dev/cua3: Permission denied

from ppplog:
Sep 25 22:38:08 sx pppd[123]: pppd 2.1.2 started by root, uid 0
Sep 25 22:38:08 sx pppd[123]: Connecting with </usr/sbin/chat TIMEOUT 3
"" \rAT 0k-+++\c-OK AT&D2&C1 TIMEOUT 60 OK ATDT6516000 CONNECT "">
Sep 25 22:38:08 sx pppd[123]: could not set up connection
Sep 25 22:38:08 sx pppd[123]: Exit.
Sep 25 22:38:08 sx chat[125]: Can't get terminal parameters: Invalid
argument

I've gone through readmes, FAQs, howtos and books and I'm still
without a clue.  Anyone have any ideas what I'm doing wrong???

Thanks much,

Glynn Black     blackgr at sysconn.com






More information about the Ale mailing list